Design and Development of Gerotor Pump using CFD analysis

Design and Development of Gerotor Pump using CFD analysis Modern day automotive research is focused on reducing cost of new vehicle without compromising the quality. So it is imperative that an automotive supplier makes use of advanced evaluation methods to develop new products. Internal combustion engine is the heart of a vehicle

Read More » »

Design and Development of Gerotor Pump using CFD analysis2019-01-14T07:54:40+00:00

Prediction of Vane Pump Performance Using CFD

Prediction of Vane Pump Performance Using CFD The vane pump is a positive displacement pump, which can be used for both fixed and variable flow by varying the eccentricity of the design. The main components (refer Fig.1) of the pump are cam ring, rotor, vanes inside the radial slots of rotor and

Read More » »

Prediction of Vane Pump Performance Using CFD2019-01-14T07:49:38+00:00

Benchmarking OpenFOAM Solver for CFD Applications

Benchmarking OpenFOAM Solver for CFD Applications Abstract: The objective of this paper is to build capability in OpenFOAM software. We selected 10 different CFD applications such as internal and external flows – Laminar and turbulence, steady and unsteady simulations, forced convection in laminar and turbulent flows, etc. The selected CFD applications are

Read More » »

Benchmarking OpenFOAM Solver for CFD Applications2019-01-14T07:37:19+00:00

Porous Modelling Approach for complex Flow and Heat Transfer in CFD

Porous Modelling Approach for complex Flow and Heat Transfer in CFD Abstract In this article, we have discussed about modelling the flow and heat transfer through complex geometries with porous media approach, to reduce the simulation complexities and time taken without compromising on the accuracy of the simulation. The methodology includes studying

Read More » »

Porous Modelling Approach for complex Flow and Heat Transfer in CFD2019-01-14T06:50:21+00:00

Application of Reverse Engineering in Furniture Segments by Traditional Technique

Application of Reverse Engineering in Furniture Segments by Traditional Technique Abstract In the current scenario, technology-based companies are continuously on the leading edge by considering unconventional and innovative ways to meet the demands of the customer requirements. When it comes to the furniture industry, their usual workflow for product development is by

Read More » »

Application of Reverse Engineering in Furniture Segments by Traditional Technique2019-01-02T23:25:20+00:00

Handling Data Conflict in Interrupt Vector Table Shared by Bootloader and Application

Handling Data Conflict in Interrupt Vector Table Shared by Bootloader and Application Introduction: The common method to download the application firmware of a Microcontroller (MC) is to use a specific programmer for that particular microcontroller. Another alternative is to use the Bootloader, which is a small non-erasable program that resides in the

Read More » »

Handling Data Conflict in Interrupt Vector Table Shared by Bootloader and Application2019-01-02T23:07:06+00:00

Non-Contact Temperature Sensor Temperature Compensation

Non-Contact Temperature Sensor Temperature Compensation This article describes about temperature compensation of non-contact temperature sensor during quick change in the object temperature. Below discussed slope compensation method can reduce the errors occurred due to the temperature calculation formula of thermopile sensor* at scenario, where object temperature changes quickly than the ambient temperature.

Read More » »

Non-Contact Temperature Sensor Temperature Compensation2019-01-02T23:00:46+00:00

Cross Platform Data Visualization Component

Cross Platform Data Visualization Component Introduction: Data Visualization is the graphical representation of information, with the goal of providing the viewer with a qualitative understanding of the information contents. There are many data visualization tools provided by online retailers which supports to create interactive visualization with dynamic data. Few of the proprietary

Read More » »

Cross Platform Data Visualization Component2019-01-02T22:53:51+00:00

Crash worthiness using LS-Dyna

Crash worthiness using LS-Dyna Ensuring quality of a product before its release is crucial in today’s world of value conscious customers. How robust a product is in different situations and how long its reliability lasts, is what defines the quality of a product. Such questions are answered by the preliminary tests that

Read More » »

Crash worthiness using LS-Dyna2019-01-02T22:40:06+00:00

Performance Study of External Gear Pump using CFD Analysis

Performance Study of External Gear Pump using CFD Analysis Abstract: In this article, CFD Analysis of an External Gear pump used in automotive industry is explained in detail. Article covers about the modeling, dynamic meshing, and transient simulation & Performance prediction of an oil pump. The focus will be on the study

Read More » »

Performance Study of External Gear Pump using CFD Analysis2019-01-02T10:51:35+00:00