Secrecy may soon become a diluted word in the Autonomous world

Secrecy may soon become a diluted word in the Autonomous world Introduction The automobile industry is weaning into autonomous technology in response to consumer preferences. Automakers are well aware that car making is no more a single event. Accelerated rise in diverse technology is driving the auto industry. Technology companies are evidently

Read More » »

Secrecy may soon become a diluted word in the Autonomous world2019-06-13T13:46:54+00:00

Collaboration is the key!

Collaboration is the key! Dream cars are becoming a reality. Autonomous cars are no more fantasies from science fiction. They are emerging from around the corner. Making them foolproof is the new challenge. At Altran, we have a bevy of service engineers who are ready to take on the challenges in the

Read More » »

Collaboration is the key!2019-06-13T13:42:57+00:00

Gate Optimization and Weld Line Prediction Using Injection Molding Simulation

Gate Optimization and Weld Line Prediction Using Injection Molding Simulation Abstract In injection molding, the part quality is affected by the gate location, which influence the plastic flows into the mold cavity. Therefore, the part quality can be improved by determining the optimum gate location, type of gate and size. In this

Read More » »

Gate Optimization and Weld Line Prediction Using Injection Molding Simulation2019-01-14T09:24:29+00:00

Warpage with in-mold constraint effect using injection molding simulation

Warpage with in-mold constraint effect using injection molding simulation Abstract In-Mold Constraint effect in injection molding is one of the concepts to improve the accuracy of warpage results in simulation. In Mold stage effect is suitable for complex part geometry with critical dimensions and multi cavity molds. Warpage is the results of

Read More » »

Warpage with in-mold constraint effect using injection molding simulation2019-01-14T09:07:52+00:00

Model Based Engineering (MBE) on Approach

Model Based Engineering (MBE) on Approach In Model Based Engineering (MBE) approach, the Computer-aided Design (CAD) models are used to drive all engineering activities during the Product life cycle. In a document based system, the model information and the Product Manufacturing Information (PMI) are recreated in a different environment. This traditional approach

Read More » »

Model Based Engineering (MBE) on Approach2019-01-14T08:50:31+00:00

Performance Testing the Pointer Wheel Package to Avoid Damages during Drop in handling and shipping environment

Performance Testing the Pointer Wheel Package to Avoid Damages during Drop in handling and shipping environment Introduction In the recent past, packaging has been increasingly recognized as a significant factor in a company’s market share and value. The significance of packaging has come to be increasingly recognized in export as well as

Read More » »

Performance Testing the Pointer Wheel Package to Avoid Damages during Drop in handling and shipping environment2019-01-14T09:57:50+00:00

Stability in Furniture

Stability in Furniture Introduction Furniture has become our basic need which supports our activities like seating, working, storing, sleeping and even a decorative art to the living room. Several standards are formatted and been followed across the globe for safety & performance of the product. Tipping is one of the mandatory tests

Read More » »

Stability in Furniture2019-01-14T09:42:19+00:00

Fatigue calculation using Abaqus Viewer

Fatigue calculation using Abaqus Viewer The present day design goal tends to be “Design for Warranty”. Warranty describes about life of component or at least the timeline within which the component will provide optimum efficiency or maintenance free functioning for the desired life. Fatigue is a phenomenon which occurs due to repetitive

Read More » »

Fatigue calculation using Abaqus Viewer2019-01-14T09:29:06+00:00

Derivation of Centre of Gravity position for symmetrical objects at unstable equilibrium condition

Derivation of Centre of Gravity position for symmetrical objects at unstable equilibrium condition Abstract Products like Rollover valve, theme park equipment’s, toys etc. are working based on the principle of shifting of weight due to unstable equilibrium created in the objects. This is accomplished by fixing the Center of Gravity (CoG) of

Read More » »

Derivation of Centre of Gravity position for symmetrical objects at unstable equilibrium condition2019-01-14T08:40:17+00:00

Development of Low Cost Machine Vision System for Part Identification using Android Smartphone, a Frugal Engineering

Development of Low Cost Machine Vision System for Part Identification using Android Smartphone, a Frugal Engineering Abstract In an automobile assembly line, visual inspection is important in order to increase the reliability. In most of the industries, it is carried out manually in all the work stations by the workers. The manual inspection

Read More » »

Development of Low Cost Machine Vision System for Part Identification using Android Smartphone, a Frugal Engineering2019-01-14T08:28:53+00:00