About admin

This author has not yet filled in any details.
So far admin has created 22 blog entries.
18 10, 2019

Fuelling the Future of Connected Cars with 5G

2019-10-23T11:58:17+00:00

Fuelling the Future of Connected Cars with 5G Vehicles today are faced with the need to deliver different kinds of applications across different domains like infotainment, telematics, driver assistance and autonomous driving with maximum reliability, safety and privacy. This calls for stable, robust, consistent and secure connectivity. Besides being able to only

Read More » »

Fuelling the Future of Connected Cars with 5G2019-10-23T11:58:17+00:00
13 06, 2019

Privacy may soon become a diluted word in the Autonomous world

2020-03-11T05:01:18+00:00

Privacy may soon become a diluted word in the Autonomous world Introduction The automobile industry is weaning into autonomous technology in response to consumer preferences. Automakers are well aware that car making is no more a single event. Accelerated rise in diverse technology is driving the auto industry. Technology companies are

Read More » »

Privacy may soon become a diluted word in the Autonomous world2020-03-11T05:01:18+00:00
13 06, 2019

Collaboration is the key!

2019-07-24T16:56:53+00:00

Collaboration is the key! Dream cars are becoming a reality. Autonomous cars are no more fantasies from science fiction. They are emerging from around the corner. Making them foolproof is the new challenge. At Altran, we have a bevy of service engineers who are ready to take on the challenges in the

Read More » »

Collaboration is the key!2019-07-24T16:56:53+00:00
14 01, 2019

Gate Optimization and Weld Line Prediction Using Injection Molding Simulation

2019-01-14T09:24:29+00:00

Gate Optimization and Weld Line Prediction Using Injection Molding Simulation Abstract In injection molding, the part quality is affected by the gate location, which influence the plastic flows into the mold cavity. Therefore, the part quality can be improved by determining the optimum gate location, type of gate and size. In this

Read More » »

Gate Optimization and Weld Line Prediction Using Injection Molding Simulation2019-01-14T09:24:29+00:00
14 01, 2019

Warpage with in-mold constraint effect using injection molding simulation

2019-01-14T09:07:52+00:00

Warpage with in-mold constraint effect using injection molding simulation Abstract In-Mold Constraint effect in injection molding is one of the concepts to improve the accuracy of warpage results in simulation. In Mold stage effect is suitable for complex part geometry with critical dimensions and multi cavity molds. Warpage is the results of

Read More » »

Warpage with in-mold constraint effect using injection molding simulation2019-01-14T09:07:52+00:00